优秀的毕业设计论文网
计算机 JAVA 电子信息 单片机 机械机电 模具 土木工程 建筑结构 论文
热门搜索词:网络 ASP.NET 汽车 电气 数控 PLC

双铰接剪叉式升降机机构设计(含CAD零件图装配图)

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用.
  
资料介绍:

双铰接剪叉式升降机机构设计(含CAD零件图装配图)(任务书,开题报告,外文翻译,论文说明书4700字,CAD图纸4张)
摘 要
升降机一般是在一定的范围用来运输货物,人员等。机器安全,稳定是非常重要的。升降机的运用范围非常广泛,各个领域对于升降机的需求也是很大的。
本文要设计一个平台高度为2m的升降机。首先要建立一个方案,这需要查阅资料去了解升降机的结构还有一些升降机的技术特点,这样才能建立一个模型。
第一步是要确定升降机机构的相关参数,然后去分析,包括一些主要零件的受力分析。建立一个设计升降机的理论,为实际制造做准备。
升降机的种类很多,首先是剪叉式机构,应用范围非常广泛,然后还有丝杆机构,通过旋转运动来实现的升降机构,另外齿轮齿条机构是通过驱动齿轮传动实现的,最后是柱塞式机构液压传动,但精度不高。升降机的用途很广,比如现在大多高楼里都存在的电梯,还有超市里用来搬运货物。
这次设计的升降机必须包含的特点是:1.可以平稳地移动2.能够承受3000kg的质量3.结构稳定并且安全4.系统结构紧凑但是不过于复杂。双铰接剪叉式升降机包含了这些优点,所以我决定研究此种升降机。
关键字:升降机;剪叉式;结构设计;受力分析 [版权所有:http://think58.com]

The elevator mechanism design
Abstract
Elevator is generally in a certain range is used to transport goods, personnel, etc. Machine safety, stability is very important. Elevator use range is very broad, all fields demand for elevator is very big.In this paper to design a platform lift height is 2 m. First of all to establish a scheme, which need to consult the data to understand the structure of the elevator and some technical characteristics of the elevator, in this way can we build a model.The first step is to determine the related parameters of elevator mechanism, then go to analysis, including some of the major components of the stress analysis. Create a design theory of elevator, in preparation for the actual manufacturing.There are several kinds of elevator first fork scissors mechanism, and then screw mechanism, gear and rack, plunger, etc. The purpose of the elevator is very wide, such as most of the buildings are now existing in the elevator, and used to transport goods in the supermarket.The purpose of this paper is to build an elevator has the following characteristics:1.This machine can move smoothly2.It is able to withstand 3000 kg3.Structural is stable and security4.System structure is compact but not too complicated.Two hinged shear fork lifter contains these advantages, so I decided to study this kind of elevator. [版权所有:http://think58.com]
Key words:Elevator;Shear fork;The structure design;Stress analysis

 
本文根据要求设计一台升降机,其平台长3000mm宽2000mm,行程2000mm,承载3000kg;使用安全、可靠、灵活;能在任意位置停止。
设计要求:
(1)平台长3000mm宽2000mm;
(2)行程2000mm;
(3)承载3000kg;
(4)使用安全、可靠、灵活;能在任意位置停止
 

[资料来源:THINK58.com]

双铰接剪叉式升降机机构设计(含CAD零件图装配图)
双铰接剪叉式升降机机构设计(含CAD零件图装配图)
双铰接剪叉式升降机机构设计(含CAD零件图装配图)
双铰接剪叉式升降机机构设计(含CAD零件图装配图)
双铰接剪叉式升降机机构设计(含CAD零件图装配图)

[资料来源:http://www.THINK58.com]
目  录
摘要    II
Abstract    III
第一章 绪 论    1
第二章 升降机的设计方案    2
2.1升降机设计原则与要求    2
2.1.1升降机的设计原则与要求    2
2.1.2设计要求:    2
2.2升降机构类型的选择    2
2.3升降机总体方案    4
2.3.1升降机构方案    4
2.3.2控制系统方案    5
第三章 升降机机械系统    6
3.1升降机构设计    6
3.2升降机构参数计算    7
3.2.1位置参数计算    7
3.2.2运动参数计算:    8
3.2.3动力参数计算    9
3.2.4升降机构参数确定    9
3.3升降机构强度校核    10
3.3.1支撑叉杆的受力分析    10
3.3.2横轴的选取    14
第五章 结论    15
参考文献    16

[版权所有:http://think58.com]

致 谢    17
[资料来源:http://THINK58.com]