优秀的毕业设计论文网
计算机 JAVA 电子信息 单片机 机械机电 模具 土木工程 建筑结构 论文
热门搜索词:网络 ASP.NET 汽车 电气 数控 PLC

百合多糖提取工艺研究

以下是资料介绍,如需要完整的请充值下载.
1.无需注册登录,支付后按照提示操作即可获取该资料.
2.资料以网页介绍的为准,下载后不会有水印.资料仅供学习参考之用.
  
资料介绍:

百合多糖提取工艺研究(7600字)
摘  要:百合多糖的提取工艺研究近年来逐步开展起来,本文通过考较物料比、提取时间、提取次数、提取温度的单因素实验,对百合多糖的提取工艺进行优化。结果显示,百合多糖提取率的最佳提取工艺参数为:提取温度52.8℃,物料比1:12,提取时间2.8h,提取次数为2次。多糖实际提取率为3.04%。

关键词:百合,多糖,提取,工艺,优化.

study on extraction of polysaccharides in lily
Abstract:  Study on polysaccharides in lily has developed in recent years. The factors affecting the yield of polysaccharides are extracting time , extracting temperature , extracting times and materials ratio.So We can optimize the extraction technology of lilium brownii polysaccharide. The results show  the best conditions for the extraction of lily polysaccharides: temperature of 52.8 ℃, time 2.8 h and materals ratio of 1:12 .Under these conditions,the actual extration rate is 3.04%.
Key words:lily , polysaccharide , extraction, process, optimization .
  [来源:http://think58.com]

百合多糖提取工艺研究


目    录
摘要…………………………………………………………………………………1
关键词………………………………………………………………………………1
1   前言……………………………………………………………………………1 [资料来源:http://www.THINK58.com]
1.1  百合成分研究动态………………………………………………………2
1.1.1   一般成分…………………………………………………………2
1.1.2   多糖类……………………………………………………………3
1.1.3   生物碱类…………………………………………………………3
1.1.4   挥发油……………………………………………………………3 [来源:http://www.think58.com]
1.2  百合多糖的提取…………………………………………………………4
1.3  百合多糖含量测定………………………………………………………4
2  实验材料与方法…………………………………………………………………5
2.1  实验仪器…………………………………………………………………5
2.2  实验材料…………………………………………………………………6 [资料来源:THINK58.com]
    2.3  实验方法…………………………………………………………………6
2.3.1  百合多糖提取工艺流程……………………………………………6
2.3.2  多糖含量的测定……………………………………………………7
2.3.3  百合多糖提取工艺的单因素实验…………………………………7
3  实验结果分析………………………………………………………………………8
3.1  百合多糖标准曲线…………………………………………………………8

[版权所有:http://think58.com]

3.2  百合多糖提取的单因素实验结果分析……………………………………9
3.2.1  料液比对多糖提取率的影响………………………………………9
3.2.2  提取温度对多糖提取率的影响…………………………………9
3.2.3  提取时间对多糖提取率的影响…………………………………10
3.2.4  提取次数对多糖提取率的影响…………………………………10
4 结论…………………………………………………………………………………11 [资料来源:http://THINK58.com]
参考文献……………………………………………………………………………12
致谢…………………………………………………………………………………13
[资料来源:www.THINK58.com]